Using The Clock And Timer - GE Profile JGB900 Owner's Manual And Installation Instructions

Usingthe clock and timer, vvww.GEAppliances.
Not all features are on all models.
Make sure the clock is set to the
correct time of day.
To Set the Clock
The clock must be set to the correct time of
dm fi)r the autonmtic oxen timing tractions
to work properl). The dine of (lax cann()t
be changed dm_Jng a timed baking or sel6
cleanin , cycle
[] Touch the CLOCK pad.
[] Touch the nmnber pads.
Touch the numl)er pads the same wa) you
read them. For example, to set 12:34, touch
the number pads I. 2. 3 and 4[in that order
If numl)er pads are not touched within one
minute after you touch the
CLOCK
pad, the
display reverts to the original setting. If this
happens, touch the CLOCK pad and reenter
the time of day.
[] Touch the START pad until the time of
dm shows in the display: This entex5
the time and starts the clock.
To checkthetimeof daywhenthedisplay is
showingotherinformation, simplytouchtheCLOCK
pad Thetimeof dayshowsunti/anotherpadls
touche_
I i i! ii i iiii
Ttie timer is a minute timer onl_
The CLEAR/OFFpaddoes not affect
the timer.
To Set the Timer
Thetimer doesnot control oven operations.
Themaxknumsemng on the timer is 9 hours
and 59 minutes.
[]
[]
Touch the KITCHEN TIMER ON/OFF
pad,
Touch the nmnber pads tmtil the
_lIllot/nt of time _()tl want shows ill
the
display. The ma_mum time that can
be entered in minutes is 59. Times
more than 59 minutes should be
changed to hom_ and minutes. For
example, to enter 90 mimKes as ]
hem" 30 minutes, touch I, 3andO in
that or(le_:
If youmakea mistake, p resstheKITCHENTIMER
ON/OFF padandbeginagain.
[]
Touch the START pad. _M'ter I)ressin°"
the
STARTpad, SET disappears;
this
tells you the time is cotmting down,
although the display does not change
tmfil one minute has passed.
[]
_,_qmn the timer reaches :00, the
control will beep 3 times followed by
one beep every 6 seconds tmfil the
KITCHEN TIMER ON/OFFpad is touched,
The6 second tonecanbe canceled by following
thestepsin theSpecial f eatures of youroven
contro/sectionunderTones a t theEndof
a Timed Cycle.
ToReset the Timer
If the display is still showing the time
remaining, you may change it by touching
the KITCHEN TIMER ON/OFF pad, then touch
the numl)er pads tmtil the time vou _mlt
appears in the display.
If the remaining time is not in the display
(clock, delay start or cooking time are in
the display), recall the remaining time by
touching
the KITCHEN TIMER ON/OFF pad
and then touching the numl)er pads to
enter the new time you want.
To Cancel the Timer
Totwh tile KITCHEN TIMERON/OFF
pad twice.
Power Outage
lf a flashing t/Yneis in tf_e display, you have
exper/enced a power failure. Reset be clock.
To reset the clock, tol*ch the CLOCK pad.
E_ter the correct time o{ da by tol_chh_g
the appropriate mm_ber pads. Tol_ch the
START pad. 18