Clock And Timer - GE JGBS07 Owner's Manual & Installation Instructions

Using the clock and timer.
Not all features are on all models.
Make sure the clock is set to the
correct time of day.
The timer is a minute timer only.
The Clear/Off pad does not affect
the timer.
16
To Set the Clock
Touch the Clock pad twice.
Touch the + or – pads.
If the + or – pads are not touched within one
minute after you touch the Clock pad, the
display reverts to the original setting. If this
happens, touch the Clock pad twice and
reenter the time of day.
To Turn Off the Clock Display
If you have several clocks in your kitchen,
you may wish to turn off the time of day
clock display on your range.
Touch the Clock pad once to turn off the
time of day display. Although you will
not be able to see it, the clock maintains
the correct time of day.
To Set the Timer
The timer does not control oven operations.
The maximum setting on the timer is 9 hours
and 59 minutes.
Touch the Kitchen Timer On/Off pad.
Touch the + or – pads until the amount
of time you want shows in the display.
The maximum time that can be entered
in minutes is 59. Times more than
59 minutes should be changed to
hours and minutes.
If you make a mistake, touch the Kitchen
Timer On/Off pad and begin again.
To Reset the Timer
If the display is still showing the time
remaining, you may change it by touching
the Kitchen Timer On/Off pad, then touch the
+ or – pads until the time you want appears
in the display.
To Cancel the Timer
Touch the Kitchen Timer On/Off pad twice.
Power Outage
If a flashing time is in the display, you have
experienced a power failure. Reset the clock.
Touch the Start/On pad until the time of
day shows in the display. This enters the
time and starts the clock.
To check the time of day when the display is
showing other information, simply touch the
Clock pad. The time of day shows until
another pad is touched.
Touch the Clock pad twice to recall the
clock display.
Touch the Start/On pad. The time will
start counting down, although the
display does not change until one
minute has passed.
When the timer reaches :00, the control
will beep 3 times followed by one beep
every 6 seconds until the Kitchen Timer
On/Off pad is touched.
If the remaining time is not in the display
(clock is in the display), recall the remaining
time by touching the Kitchen Timer On/Off
pad and then touching the + or – pads to
enter the new time you want.
To reset the clock, touch the Clock pad. Enter
the correct time of day by touching the + or –
pads. Touch the Start/On pad.