GE Profile JGB900 Owner's Manual And Installation Instructions page 31

wvvw.GEAppliances.com
The oven door must be closed and all controls set correctly for the cycle to work properly.
,®
OD dD(D (D (D
(D(DOD(Zi
OD(DO(D(D
(D(D(D(Z!D
How to Delay the Start of Cleaning
Make sure the clock shows the correct time
of day.
[] Touch the SELFCLEAN pad.
[] Using the nmnber pads, enter the
desired clean time.
[] Touch the DELAYSTART pad. The
earliest start time you can set will
appear in the display.
[] Using the number pads, enter the
time of day _:,t:l want the clean cycle
1o staI_.
[] Touch
the START pad.
The door locks automatically. The display
will show the start time. It will not be
possible to open the oven door tmtil
the temperature drops below the lock
temperatm'e and the LOCKEDDOOR
light goes off.
_]_en the LOCKEDDOOR light is off, open
the doox:
After a Clean Cycle
You may notice some white ash in the oxen.
_]pe it up with a damp cloth alter the
o_,en cools.
If white spotsremain, r emove themwith a soap-
filledsteel-wool p ad andrinsethoroughly w ith a
whegar a ndwatermlkture.
These deposits are usuall) a salt residue
that cannot be remoxed b_ the clean cxcle.
If the oven is not clean after one clean
c',cle repeat the c_cle,
You cannot set the oven fi)r cooking tmtil
the oxen is cool enough for the door to
unlock.
_._lfile the oven is sel6cleaning, you can
touch the CLOCKpad to display the
time of day: To return to the clean
cotmtdown, touch the COOKING TIME
pad.
If the shelves become hard to slide, apply
a small amount _ffvegetable oil or cooking
oil to a paper u_wel and wipe the edges of
the oven shelves with the paper towel.
3/