Using The Clock And Timer - GE JS960 Owner's Manual

Electric slide-in ranges
Hide thumbs Also See for JS960:
Table of Contents

Advertisement

Using the clock and timer.

Make sure the clock is set to the
correct time of day.
The timer is a minute timer only.
The timer does not control oven
operations. The maximum setting on
the timer is 9 hours and 59 minutes.
To Set the Clock
The clock must be set to the correct
time of day for the automatic oven
timing functions to work properly. The
time of day cannot be changed during
a timed baking or self-cleaning cycle.
To Set the Timer
Press the KITCHEN TIMER ON/OFF
pad.
Press the INCREASE or DECREASE
pads until the amount of time you
want shows in the display.
If you make a mistake press the
KITCHEN TIMER ON/OFF pad and
begin again.
To Reset the Timer
If the display is still showing the time
remaining, you may change it by
pressing the KITCHEN TIMER ON/OFF
pad, then press the INCREASE or
DECREASE pads until the time you want
appears in the display.
To Cancel the Timer
Press the KITCHEN TIMER ON/OFF pad
twice.
Press the CLOCK pad.
Press the INCREASE or DECREASE
pads.
Press the START pad.
Press the START pad.
When the timer reaches :00 , the
control will beep 3 times followed
by one beep every 6 seconds until
the KITCHEN TIMER ON/OFF pad
is pressed.
The 6 second tone can be canceled by
following the steps in the Special features
of your oven control section under Tones at
the End of a Timed Cycle.
If the remaining time is not in the
display (clock, delay start or cooking
time are in the display), recall the
remaining time by pressing the
KITCHEN TIMER ON/OFF pad and then
pressing the INCREASE or DECREASE
pads to enter the new time you want.
17

Advertisement

Table of Contents
loading

Table of Contents