Advertisement
Self-Cleaning
(cont'd)
Self-Clean
Time
Length
For satisfactory results, use a 2 hour Self-Clean cycle for light soils, a 3 hour cycle for average, and a 4 hour cycle for
heavy soils. NOTE: The kitchen area should be well ventilated using an open window, ventilation fan or exhaust hood
during the Self-Clean cycle• This will help eliminate the normal odors associated with the Self-Clean cycle•
To Set the Controls
for a Self-Clean
Cycle or a Delayed
Start Self-Clean
Cycle:
(Note: If you do not want to start a Delayed Self-Clean Cycle, skip steps 2 & 3.)
1.
Be sure the clock shows the correct time of day.
D_i_
....
2.
Press
pad.The
: in the time of day will flash•
3.
Press and hold the A
pad to scroll to the time to start the delayed Self-Clean cycle• Release the pad when the
desired time is displayed•
4.
Press
pad."
"appears in the display.
5.
Press the_
or V
pad once. "3:00" appears in the display for a 3 hour cycle. To change to a 2 hour cycle press
V
pad. "2:00" appears in the display. To select a 4 hour cycle press _
pad. "4:00" appears in the display.
As soon as the controls are set, the motor driven lock will begin to close automatically and the "LOCK" indicator light
will flash• DO NOT open the oven door while the light is flashing (it takes about 15 seconds for the oven door to lock)•
6.
"CLn" will appear in the display during the Self-Clean cycle and the "LOCK" light will glow until the Self-Cleaning cycle
is complete or cancelled and the oven temperature has cooled.
t
When the Self-Clean Cycle is Completed:
1.
The time of day or "End" will appear in the display window and the "Clean" and "LOCK" light will continue to glow.
2•
Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened.
3.
If "End" is in the display and the Select Clean indicator light remains ON, press (s_P) pad. The time of day will appear
in the display.
NOTE: When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel•
Stopping
or interrupting
a Self-Cleaning
Cycle
If it becomes necessary to stop or interrupt a Self-Cleaning cycle:
• Press
pad.
2.
Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened•
3.
Restart the Self-Clean cycle once all conditions have been corrected•
To avoid possible burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the
side of the oven when opening the door to allow hot air or steam to escape•
DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and
avoid possible burns when opening the door after the Self-Cleaning cycle has completed• The oven may still be VERY
HOT.
19
Advertisement
