Download Print this page

Kenmore 790.4676 Series Use & Care Manual page 13

Slide-in models
Hide thumbs Also See for 790.4676 Series:

Advertisement

Setting Oven Controls
(cont'd)
To Set or Change
the Temperature
for Baking
The oven can be programmed to bake at any temperature from 170°F to 550°F (77°C to 287°C).
To Set the Controls
for Baking:
1.
Press B;_ke pad."
"appears in the display.
2.
Within 5 seconds, press the j%.
or V
pad. The display will show "350°F (177°C) ''. By pressing and holding thej_
or V
pad, the temperature can then be adjusted in 5°F increments (1°C if the control is set to display Celsius).
3.
As soon as the _%. or V
pad is released, the oven will begin heating to the selected temperature. When the oven
temperature reaches the desired baking temperature, the preheat indicator light will turn OFF and the control will beep
3 times.
4.
To cancel baking, press (s_oP') pad.
To Change the Oven Temperature
after Baking has Started:
1.
Press
pad and make sure the bake temperature is displayed.
2.
Press the j_
or V
pad to increase or decrease the set temperature.
To Set Control
for Continuous
Bake or 12 Hour Energy
Saving
The oven control has a built-in 12 Hour Energy Saving feature that will shut off the oven if the control is left on for more
than 11 hours and 59 minutes. The oven can be programmed to override this feature for continuous baking.
,,,
To set control
for continuous
baking:
1.
Press and hold
pad down for 5 seconds until tone is heard, "-- --
hr" will appear in display for continuous
cooking. The current time of day will return to the display.
.
,.
2. To cance theCont nuous B ake f unct on,press a no noo
pad for5seconds until tone isheard. "12hr" will
appear in display indicating that the control has returned to the 12 Hour Energy Saving feature.
To Set Control
for Oven Lockout
The control can be programmed to lock the oven door and lock out the oven control pads.
To set Control for Oven Lockout feature:
1.
Press and hold ('s_p')pad for 3 seconds. "Loc" will appear in display, the "Door Locked" indicator light will flash and the
motor driven doorrock will begin to close automatically. DO NOT open oven door while the indicator light is flashing.
Allow about 15 seconds for the oven door to lock. Once the oven door is locked, the current time of day will appear in
the display.
2.
To cancel the Oven Lockout feature, press and hold _
pad for 3 seconds. The control will unlock the oven door and
resume normal operation.
Note: While in the Oven Lockout mode when the BAKE, BROIL, WARM & HOLD, COOKT[ME,
DELAY START and
SELECT CLEAN pads are pressed, "Loc" will appear in the display until the control
pad is released.The
OVEN
LIGHT, CLOCK and TIMER pads will still operate.
13

Advertisement

loading

This manual is also suitable for:

790.46785 series