Advertisement
Control Pad Functions
Note:
The appearance of your oven control may differ slightly from the one illustrated below. However, all functions are
the same. Also, push buttons or pads may be shaped differently than those appearing in this Use and Care Guide.
READ THE INSTRUCTIONS
CAREFULLY
BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described below.
CLOCK SET
COOK TiME
UP and DOWN ARROW PADS-- Used
SAKE PAD--Used
PAD--
Used
PAD--
Used to
along with the function pads to select oven
to select the bake
to set the
enter the length of
temperature, cook time, start time (when
function.
time of day.
the baking time.
programming
an automatic start time), time of
I
use.
\
day, clean time and minute timer.
I
/
\
LIGHT PAD--
_
_
\
I
/
Used to turn oven
_
X
\
I
/
./'//
interior light ON or
_e
_e
__
le
•
OFF
C)
Cook
I
.
_ ,®,,mo
'r°"
SELECT CLEAN
PAD-- Used to
select the Self-
Cleaning cycle. A
2, 3 or 4 hour Self-
Clean time may be
selected.
FEATURE iNDiCATOR
LIGHTS--
These light to
show which feature is in
BROIL PAD--
Used to select
the variable broil
function.
WARM & HOLD
PAD-- Used to set
the Warm & Hold
_
featu re.
•
•
•
0
OVEN
Select
Timer
Delay
.PREHEAT
_
__
_
Clean
I
I
TOP PAD--
Used
Set/Off
Start
Q
DOOR
LOCKED
_-...._,,._
tO clear any function
_, Lo_o_
_
except the time of
day and minute
.
timer. Press STOP
TIMER SET/OFF PAD--
Used to set or cancel the
minute timer. The minute
timer does not start or stop
cooking. Also,
TIMER SET/OFF pad is
used to set the Continuous
Bake feature.
DELAY START
PAD-- Used to set
the desired start
time for baking &
Self-Clean. May be
used with COOK
TIME to program a
delayed bake cycle.
OVEN, PREHEAT & DOOR LOCKED LIGHTS* -- The "OVEN"
light will glow each time the oven turns on to maintain the set oven
temperature. The "PREHEAT"
light will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The "DOOR LOCKED"
light will flash when
the oven door locks and unlocks or when using the Self-Clean cycle
or when the oven door lockout is activated. The indicator light will glow
constantly after the door locks.
iii!"?'_iiii
iiiiiii_il;_;!i
to stop cooking.
Also the STOP pad
is used to activate
oven door lockout
setting.
*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during
preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature, When the pre-
heat indicator light turns OFF, your oven has reached the set temperature,
For a silent
control
panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed
for silent operation. Press and hold
pad. After 5 seconds, the control will beep once. This will block the controls from
sounding when a pad is pressed. To return to normal sound operation, press and hold
pad again for 5 seconds until
the control beeps once.
Temperature
conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature
to °C (Celsius)
or from °C to °F (control should
not be in a Bake or Clean mode):
1.
Press Broil pad."
"appears in the display.
2.
Press and hold the A
pad until "HI" appears in the display,
3.
Press and hold Broii pad until °F or °C appears in the display,
4.
Press the A
or V
pad to change °Fto °C or °C to °R
5.
Press any control pad to return to normal operating mode,
11
Advertisement
