Sending A Fax By Direct Keypad Dialling - Sharp FO-IS115N Operation Manual

Sending a Fax by Automatic Dialling
Making a voice call with an auto-dial number
Rapid Key Dialling: Lift the handset and press the Rapid Key.
Speed Dialling: Lift the handset, press
number with the number keys (the number must be 3 digits: enter "001" for
Speed Dial 1, "010" for Speed Dial 10, etc.).
Search Dialling: Press
party appears, and lift the handset.
(You can also lift the handset first, search for the number, and then press
START
.)

Sending a fax by Direct Keypad Dialling

Use this method to dial a full fax number without using the handset.
1
Load the document(s).
•
If desired, press
resolution and/or contrast.
2
Enter the number of the receiving machine with the number keys.
•
If a pause is required between any of the digits to access a special service
or an outside line, press
seconds per pause). Several pauses can be entered in a row.
3
Check the display. If the number shown is correct, press
•
If the number is not correct, press
then re-enter the correct digit(s).
68
or
RESOLUTION
to set the
REDIAL
. The pause appears as a hyphen (two
SPEED DIAL
, and enter the Speed Dial
until the name or number of the other
STOP
to clear the incorrect digits, and
START
.