Sending A Fax By Direct Keypad Dialling - Sharp UX-BS60 Operation Manual

Sending a Fax by Automatic Dialling
2
Press (or
display (if no name was stored, the number will appear).
3
If you are sending a fax, press
•
Important: Remove the document as soon as it exits the machine.
Otherwise, ink from received faxes and copies may soil the document.
•
If the transmission is completed successfully, the machine will beep once.
•
If an error occurs, the machine will beep three times and print a Transaction
Report to inform you of the problem (see page 109).
If you are making a phone call, lift the handset. Dialling begins. (If you
lifted the handset before searching for the number, press
begin dialling.)

Sending a fax by Direct Keypad Dialling

You can also enter a full number with the number keys and then press the
START/
MEMORY
key to begin dialling. You can use this method to dial a full number
when you don't need to speak to the other party before faxing.
1
Load the document(s).
•
If desired, press
resolution and/or contrast.
78
) until the name of the other party appears in the
START/
MEMORY
RESOLUTION/
RECEPTION
to set the
. Dialling and transmission begin.
29-MAY 12:00
READY TO SEND
START/
MEMORY
to