Polling (Requesting A Fax) - Sharp FO-IS115N Operation Manual

Polling (Requesting a Fax)

Polling (Requesting a Fax)
Polling allows you to call another fax machine and have it send a document
(previously loaded in its feeder or in memory) to your machine without
assistance from the operator of the other machine.
Note: Polling is useful when you want the receiving fax machine, not the
transmitting fax machine, to bear the cost of the call.
♦
To use the polling function, the other machine must be capable of being
polled. Before polling, make sure the other machine is set up to receive
your polling request.
Enabling the polling key
To use Polling, you must first set "POLLING" to "YES" and select a Rapid Key
for use as the polling key in the Option Settings as explained on pages 139
and 141.
Using polling to request fax transmission
1
Dial the fax machine that you wish to poll using one of the following
methods:
•
Enter the full number using the numeric keys.
SPEED DIAL
•
Press
•
Pick up the handset (or press
Rapid Key. Wait for the fax answerback tone.
•
Press
in the display
2
Press the Rapid Key that you specified as the polling key in the Option
Settings.
•
If you used the handset, replace it when POLLING appears in the display.
Reception will begin.
130
and enter a 3-digit Speed Dial number.
SPEAKER
or until the name (or number) of the other party appears
) and dial the full number or press a