Sharp FO-IS115N Operation Manual page 74

Sending a Fax by Automatic Dialling
Checking and cancelling stored fax jobs
If you use automatic dialling (including Direct Keypad Dialling) to send a fax
while the machine is busy with another job, the fax job will be stored in the
machine's memory and performed after all previously stored jobs are finished.
To check what fax jobs are waiting in memory to be performed, or to cancel a
job, follow the steps below.
♦
Timer transmission jobs can also be checked and canceled using this
procedure.
1
Press
INFO
2
Make sure that [TX JOBS] appears in the display and press
3
Press
•
The top line of the display shows the memory number assigned to the job
and the time the job was stored. The bottom line alternately shows the
destination and the status of the job.
•
[NO DATA] will appear if no jobs are currently stored in memory.
4
To cancel a job, display the job and press
[IF CLEAR, PRESS START] will appear. Press
STOP
5
Press
70
.
or to scroll through the stored fax jobs.
to exit.
START
.
START
again to clear the job.
.