Sharp AR-P27 Software Setup Manual page 16

USING THE MACHINE WITH A PARALLEL OR USB CONNECTION
Installation in Windows 98/Me/2000 (USB cable)
1
The USB cable must not be connected
to the machine. Make sure that the
cable is not connected before
proceeding.
If a cable is connected, a Plug and Play
window will appear. If this happens, click
the [Cancel] button to close the window
and disconnect the cable.
The cable will be connected in step 15.
Note
2
Insert the "Software CD-ROM" into
your computer's CD-ROM drive.
Insert the "Software CD-ROM" that shows
"Disc 1" on the front of the CD-ROM.
3
Double-click [My Computer] (
then double-click the [CD-ROM] icon (
4
Double-click the [Setup] icon (
5
The "SOFTWARE LICENSE" window
will appear. Make sure that you
understand the contents of the license
agreement and then click the [Yes]
button.
You can show the "SOFTWARE
Note
LICENSE" in a different language by
selecting the desired language from
the language menu. To install the
software in the selected language,
continue the installation with that
language selected.
6
Read the message in the "Welcome"
window and then click the [Next] button.
14
7
), and
).
8
).
9
10
Click the [Printer Driver] button.
Before installing the software, be sure to
click the [Display Readme] button and view
the detailed information on the software.
Click the [Next] button.
Click the [Custom installation] button.
When you are asked how the printer is
connected, select [Connected to this
computer] and click the [Next] button.