Sharp AR-P27 Software Setup Manual page 23

8
Click the [Custom installation] button.
9
Select [Shared Printer] and click the
[Next] button.
10
Select the name of the printer set as
the shared printer on the print server
from the list, and click the [Next]
button.
You can also click the [Add Network Port]
button and select the printer to be shared
(the machine) by browsing the network in
the window that appears.
If the shared printer does not appear
Note
in the list, check the settings in the
printer server.
USING THE MACHINE AS A SHARED PRINTER
11
When the model selection window
appears, select the model name of your
machine and click the [Next] button.
If you are installing the PC-Fax driver, go
to step 13.
12
When the printer driver selection window
appears, select the printer driver to be
installed and click the [Next] button.
Be sure to select the same printer driver
as the printer driver used in the print
server (the machine).
13
Follow the on-screen instructions.
14
When the "Finish" screen appears,
click the [Close] button.
After the installation, a message
Note
prompting you to restart your
computer may appear. If this message
appears, click the [Yes] button to
restart your computer.
This completes the installation.
• After installation, see "CONFIGURING THE
PRINTER DRIVER" (page 24) to configure
the printer driver settings.
• If you installed the PS printer driver or the
PPD driver, the PS display fonts can be
installed from the "PRINTER UTILITIES"
CD-ROM that accompanies the PS3
expansion kit. See "INSTALLING THE PS
DISPLAY FONTS" (page 22).
21