Sharp AR-P27 Software Setup Manual page 37

MAC OS 9.0 - 9.2.2
If you are using Mac OS 9.0 to 9.2.2, make sure that "LaserWriter 8" has been installed and that the
Note
"LaserWriter 8" checkbox is selected (
install it from the system CD-ROM supplied with your Macintosh computer.
1
Insert the "Software CD-ROM" into
your computer's CD-ROM drive.
Insert the "Software CD-ROM" that shows
"Disc 2" on the front of the CD-ROM.
2
Double-click the [CD-ROM] icon (
the desktop.
3
Double-click the [MacOS] folder.
Before installing the software, be sure to
read "ReadMe First". "ReadMe First" is in
the [US-English] folder ([English] folder in
areas other than the U.S.) in the [Readme]
folder.
4
Double-click the [Installer] icon (
5
Click the [Install] button.
6
The License Agreement window will
appear. Make sure that you understand
the contents of the license agreement
and then click the [Yes] button.
) in "Extensions Manager" in "Control Panels". If not,
7
Read the message in the window that
appears and click the [Continue]
button.
Installation of the PPD file begins.
After the installation, a message
prompting you to restart your computer
) on
will appear. Click the [OK] button and
restart your computer.
This completes the installation of the
software. Next, configure the printer driver
settings.
8
Select [Chooser] from the Apple Menu.
).
9
Create a printer.
(1) Click the [LaserWriter 8] icon.
If multiple AppleTalk zones are displayed,
select the zone that includes the printer.
(2) Click the machine's model name.
The machine's model name usually
appears as [SCxxxxxx]. ("xxxxxx" is a
sequence of characters that varies
depending on your model.)
(3) Click the [Create] button.
(1)
(2)
(3)
35