Sharp AR-P27 Software Setup Manual page 20

USING THE MACHINE WITH A PARALLEL OR USB CONNECTION
16
When the printer name window
appears, click the [Next] button.
If you wish to change the printer name,
enter the desired name.
17
When you are asked if you wish to
install the display fonts, select an
answer and click the [Next] button.
When the PC-Fax driver is being installed,
this screen does not appear. Go to the
next step.
18
Follow the on-screen instructions.
Read the message in the window that
appears and click the [Next] button. When
the installation completed screen appears,
click the [OK] button.
19
Click the [Close] button in the window
of step 7.
When a message appears prompting you
to connect the machine to your computer,
click the [OK] button.
After the installation, a message
Note
prompting you to restart your
computer may appear. If this message
appears, click the [Yes] button to
restart your computer.
18
20
Turn off the power of the machine and your
computer, and connect the machine to your
computer with the parallel cable (page 19).
After connecting the machine to your
computer, turn on the power of the
machine and then start up your computer.
This completes the installation.
• After installation, see "CONFIGURING THE
PRINTER DRIVER" (page 24) to configure
the printer driver settings.
• If you installed the PS printer driver or the
PPD driver, the PS display fonts can be
installed from the "PRINTER UTILITIES"
CD-ROM that accompanies the PS3
expansion kit. See "INSTALLING THE PS
DISPLAY FONTS" (page 22).
• If you are using the machine as a shared
printer, see "USING THE MACHINE AS A
SHARED PRINTER" (page 20) to install the
printer driver on each of the client computers.