Speaker Settings - Sharp HT-CN300W Operation Manual

Speaker settings

HT-CN300W
Speaker settings are displayed on the TV screen only when the unit is set to DVD or
VIDEO (see page 23).
Note:
The settings appear only when the TV is connected with a video cable. They will not
appear when the TV is connected with an S-video cable.
„ Speaker size setting
You can change the sizes of the front speakers, centre speaker, and surround
speakers, or turn on or off the centre speaker, surround speakers, or subwoofer.
1
Press the SET UP button.
2
Within 10 seconds, press the
press the ENTER button.
3
Within 10 seconds, press the
speaker.
The indicators of selected speakers flash.
TV screen
29
or button to select "SP SIZE", and
or button to select the desired
4
Within 10 seconds, press the or
z To set sizes of other speakers, repeat the operation from step 3.
z You can complete the setting operation by pressing the SET UP button twice.
Speaker type
Front speaker (Left, Right) F-LARGE
F-SMALL *
Centre speaker C-LARGE
C-SMALL *
C-NO
Surround speaker (Left, Right) S-LARGE
S-SMALL *
S-NO
Subwoofer SW-YES *
SW-NO
(*) indicates the default setting (recommended for the supplied speakers).
Caution:
z To set the speaker size, set the sound mode to "STANDARD". In the stereo or
virtual mode, only the subwoofer can be set.
z F-SMALL and SW-NO cannot be combined. If the subwoofer is changed to SW-
NO whilst the front speakers are set to F-SMALL, they are changed to F-LARGE.
When the front speakers are changed to F-SMALL whilst the subwoofer is set to
SW-NO, it is changed to SW-YES.
02/7/11 HT-CN300W_A_4.fm
button to select their sizes.
Speaker size
Large diameter
Small diameter
Large diameter
Small diameter
OFF
Large diameter
Small diameter
OFF
ON
OFF