Operation Buttons On The Remote Control - Sharp HT-CN300W Operation Manual

Operation buttons on the remote control (continued)
HT-CN300W
„ Memory 1/2 buttons for other equipment
Memory 1 buttons:
The remote control is set at the factory to operate the Sharp's DVD, TV and VCR.
To operate Sharp products or other companies' equipment that cannot be controlled
by the default remote control, you can memorise their remote control operations
(learn function) (see page 20).
Set the MEMORY 1/2 selector switch to MEMORY 1 to use the Memory 1 buttons.
Memory 2 buttons:
No functions are stored at the factory setting. Memorise the remote control signals
(learn function) of your equipment before use (see page 20).
Set the MEMORY 1/2 selector switch to MEMORY 2 to use the Memory 2 buttons.
1
2
3
4
5
6
9 10 11 12
19
OPEN
13
14
15
16
7 17 19
8 18 20
22 23 24
21
Initial setting for Memory 1 buttons:
1 TV/VCR
Switches the input to TV or VCR.
2 VCR CH
Switches up the VCR channels.
3 TV VOL
Turns up the TV volume.
4 TV CH
Switches up the TV channels.
5 TV VOL
Turns down the TV volume.
6 TV CH
Switches down the TV channels.
7 VCR CH
Switches down the VCR channels.
8 VCR
Pauses VCR.
9 VCR
Rewinds the VCR rapidly.
10 VCR
Advances the VCR rapidly.
11 VCR
Stops the VCR.
12 VCR
Plays the VCR.
13 AUDIO
Switches the DVD sound.
14 SET UP
Changes the DVD settings.
15
Selects the DVD menu.
16 DISPLAY
Switches the DVD display.
17
Selects the DVD menu.
18 SUB
Switches the subtitle of a DVD.
19 ENTER
Validates the menu.
20
Selects the DVD menu.
21 ANGLE
Switches the angle of the DVD images.
22 ZOOM
Zooms the DVD images.
23
Selects the DVD menu.
24 TOP
Displays the top menu of the DVD.
For details, refer to the operation manual attached to the other equipment.
02/7/11 HT-CN300W_A_3.fm