Operation Buttons On The Remote Control - Sharp HT-CN300W Operation Manual

Operation buttons on the remote control

HT-CN300W
This remote control allows you to operate the main unit and other Sharp equipment.
By memorising remote control operations (learn function), you can operate various
equipment.
„ Operation buttons for the main unit
1 2
17
Operation buttons for other equipment
(See page 18.)
Operation buttons for the main unit
Memory 1/2 buttons for other equipment
(See page 19.)
3 4 5 6 7 8 9
10
11
12
13
14 15 16 17 18 19 20
1 ON/ (STAND-BY)
Sets the power to "ON" or "STAND-BY".
2
Changes the settings of time, tuner, timer/sleep operations, and speakers.
3 VOLUME
Decreases the volume.
4 VOLUME
Increases the volume.
5 STANDARD
Sets the sound mode to "STANDARD".
6 DYNAMIC SOUND
Switches the dynamic sound.
7 SET UP
Changes the speaker setting.
8 CLEAR
Deletes the tuner pre-selections.
9 CLOCK
Sets or displays the clock time.
10 MEMORY
Presets the tuner.
11 TIMER/SLEEP
Sets the power to "ON" or "STAND-BY" at the desired time.
12 DIMMER
Adjusts the brightness of the main unit display.
13 DISPLAY
Switches the TV display.
14
Changes the settings of tuner and speakers.
15
Changes the settings of time, tuner, timer/sleep operations, and speakers.
16 ENTER
Validates the settings of time, timer/sleep operations, and speakers.
17
Changes the settings of tuner and speakers.
18 2CH
Switches the sound mode to "VIRTUAL" or "STEREO".
19 EQ
Changes the tone setting.
20 X-BASS
Adjusts the bass or activates/deactivates the demonstration mode.
02/7/11 HT-CN300W_A_3.fm