Setting The Clock; Setting The Disc; Reformat - Sharp DV-RW250X Operation Manual

Setting the clock / Setting the disc
Your VCR/DVD is fitted with a 24 hour clock.
You must set the date and time for timer record-
ings.
Preparation:
• Turn ON the TV and select its AV channel (this may
be labelled EXT / AUX etc.)
• Select "CLOCK" from the "SYSTEM SETUP" sec-
tion of the SETUP MENU and press ENTER (For the
full procedure, see steps 1 to 3 in "Using the SETUP
MENU" on page 17).
SETUP MENU
TIMER REC SET
SYSTEM SETUP
CLOCK (DD/MM/YY)
AV SETUP
REC SETUP
CHANNEL SETUP
OTHER
SELECT
ENTER ENTER
Ex.: Setting the clock to "10:20" March, 27th, 2005.
1
Select the desired items using
year, hour and minute), then press ENTER.
01 /01/04 00:00
2
Press or to set the value of the selected item.
0
27/03/05 10:20
3
Repeat steps 1 and 2 to set the date, year and
present time, and press ENTER. The SETUP
MENU will close.
This completes clock time setting.
NOTE:
In case of a power failure, the clock will continue to
operate for another 30 minutes with quartz-controlled
precision. To indicate that the power failure has lasted
for an excessive period of time "0:00" will appear on
the display. In this case readjust time and date.
20
LANGUAGE
CLOCK
PARENTAL
01/01/04 00:00
CLOCK
DISC SETUP
OTHER
RETURN BACK SETUP END
or (day, month,
You can format, protect, or finalise a disc.
Preparation:
• Turn ON the TV and select its AV channel (this may
be labelled EXT / AUX etc.)
• Select "DISC SETUP" from "SYSTEM SETUP". For
the procedure, see steps 1 to 3 in "Using the SETUP
MENU" on page 17.
SETUP MENU
TIMER REC SET
SYSTEM SETUP
REFORMAT AS DVD VIDEO
AV SETUP
REFORMAT AS DVD VR
NEW DISC FORMAT
REC SETUP
FINALISE
CHANNEL SETUP
PROTECT DISC (VR ONLY)
OTHER
UNDO FINALISE
SELECT
ENTER ENTER RETURN

REFORMAT

You can format a recorded DVD-RW.
Check the content of the disc before format. If you for-
mat the disc, the recorded content of the disc will be
erased.
To format a DVD in the Video mode, select "REFOR-
MAT AS DVD VIDEO", and to format it in the VR mode,
select "REFORMAT AS DVD VR".
The screen below will appear.
REFORMAT
START
• When you select "START" and press ENTER, format
will start. The screen below will appear.
• When you select "CANCEL" and press ENTER, the
DISC SETUP screen will appear.
NOTES:
• You cannot format Ver. 1.0 DVD-RW and DVD-R.
• You cannot format a disc if the disc protection is "ON".
In such a case, be sure to cancel the disc protection
(see page 21) before format.
• During formatting, finalising and undo finalising, the
progress will be shown by "–" in the front display
window.
DISC SETUP
PROCEED
PROCEED
VR
PROCEED
OFF
PROCEED
BACK SETUP END
CANCEL
REFORMAT