Table of Contents
Advertisement
Setting the clock / Setting the disc
Your VCR/DVD is fitted with a 24 hour clock.
You must set the date and time for timer record-
ings.
Preparation:
• Turn ON the TV and select its AV channel (this may
be labelled EXT / AUX etc.)
• Select "CLOCK" from the "SYSTEM SETUP" sec-
tion of the SETUP MENU and press ENTER (For the
full procedure, see steps 1 to 3 in "Using the SETUP
MENU" on page 19).
SETUP MENU
T I M E R R E C S E T
S Y S T E M S E T U P
C L O C K ( D D / M M / Y Y )
AV S E T U P
A U TO T I M E
R E C S E T U P
C H A N N E L S E T U P
O T H E R
SELECT
ENTER
ENTER
Ex.: Setting the clock to "10:20" September, 27th, 2004.
1
Select the desired items using
month, year, hour and minute), then press ENTER.
01
/01/04 00:00
2
Press
or
to set the value of the selected item.
27/09/04 10:20
0
3
Repeat steps 1 and 2 to set the date, year and
present time, and press ENTER. The SETUP
MENU will close.
This completes clock time setting.
To set the AUTO TIME
1
Select "AUTO TIME" from "CLOCK".
2
Press ENTER, then press
OFF.
NOTES:
• In case of a power failure, the clock will continue to
operate for another 30 minutes with quartz-controlled
precision. To indicate that the power failure has lasted
for an excessive period of time "0:00" will appear on
the display. In this case readjust time and date.
• When the AUTO TIME is set to ON, the unit
automatically corrects the clock setting.
22
L A N G U A G E
C L O C K
PA R E N TA L
0 1 / 0 1 / 0 4 0 0 : 0 0
C L O C K
O N
D I S C S E T U P
O T H E R
SELECT
RETURN
BACK
SETUP
END
or
or
to select ON or
You can format, protect, or finalise a disc.
Preparation:
• Turn ON the TV and select its AV channel (this may
be labelled EXT / AUX etc.)
• Select "DISC SETUP" from "SYSTEM SETUP". For
the procedure, see steps 1 to 3 in "Using the SETUP
MENU" on page 19.
SETUP MENU
T I M E R R E C S E T
S Y S T E M S E T U P
AV S E T U P
R E C S E T U P
C H A N N E L S E T U P
O T H E R
ENTER
REFORMAT
You can format a recorded DVD-RW.
Check the content of the disc before format. If you for-
mat the disc, the recorded content of the disc will be
erased.
(date,
To format a DVD in the Video mode, select "REFOR-
MAT AS DVD VIDEO", and to format it in the VR mode,
select "REFORMAT AS DVD VR".
The screen below will appear.
• When you select "START" and press ENTER, format
will start. The screen below will appear.
• When you select "CANCEL" and press ENTER, the
DISC SETUP screen will appear.
NOTES:
• You cannot format Ver. 1.0 DVD-RW and DVD-R.
• You cannot format a disc if the disc protection is "ON".
In such a case, be sure to cancel the disc protection
(see page 23) before format.
• During formatting, finalising and undo finalising, the
progress will be shown by "–" in the front display
window.
D I S C S E T U P
R E F O R M AT A S D V D V I D E O
R E F O R M AT A S D V D V R
N E W D I S C F O R M AT
F I N A L I S E
P R O T E C T D I S C ( V R O N LY )
U N D O F I N A L I S E
SELECT
ENTER
RETURN
BACK
SETUP
REFORMAT
START
CANCEL
REFORMAT
P R O C E E D
P R O C E E D
V R
P R O C E E D
O F F
P R O C E E D
END
Advertisement
Table of Contents
