Sharp DV-RW250X Operation Manual page 75

Dubbing using other equipment
Playback unit connection.
The playback unit can be a camcorder or a video recorder. See each operation manual for each playback
operation. The copy protected video or DVD disc cannot be copied.
Dubbing with A/V-cable (or S-Video cable) (not supplied)
To playback unit
A/V-cable (not supplied)
S-Video cable (not supplied)
Dubbing with 21 pin-RCA cable
To playback unit
21 pin-RCA cable
(supplied)
Recording unit
Recording unit
TV-unit (not supplied)
AV1 or AV2
Press INPUT SELECT on the remote con-
trol repeatedly until A3 appears on the front
display.
If the other VCR or camcorder is equipped
with S-Video output, a superior picture will
be achieved using an S-Video cable
connected to the S-Video-input (AV3) on the
front panel with S-Video cable. In this case,
you must select "S-VIDEO" mode in AV3 IN-
PUT-setting on page 23.
If you select "VIDEO", only the composite
video signal will be input. (S-Video input sig-
nal will be cut.)
The S-Video input can be used only for re-
cording on the disc. (The S-Video input can-
not be used for recording on the video tape.)
Press INPUT SELECT on the remote
control repeatedly until A1 or A2 appears
on the front display.
73