Stereo Recording And Playback - Sharp DV-RW250X Operation Manual

Stereo recording and playback

This VCR/DVD is capable of recording
sound in Hi-Fi system. The recording will
be performed automatically. NICAM
STEREO broadcasts are recorded in its
original sound system regardless of the
setting. If you wish to record NICAM
programmes, select NICAM
"AUTOMATIC" at "NICAM" -setting on
page 24.
And, this VCR/DVD can also receive and
record German A2 stereo program. The
tape recording is always both in HiFi and
in MONO on the standard longitudinal
track. In case of bilingual TV programs
always the two audio channels will be
recorded (only in case of tape or DVD-
RW VR recording).
NICAM programmes are divided
into 4 types as shown below.
NICAM STEREO
broadcast
"NICAM ST" illumi-
nates when a
NICAM STEREO
broadcast signal is
received.
NICAM MONO A
broadcast
"NICAM M1" illumi-
nates when a
NICAM MONO A
broadcast signal is
received.
NICAM MONO A B
broadcast
"NICAM M1/2" illu-
minates when a
NICAM MONO A
and MONO B
broadcast signal is
received.
NICAM OFF
This will be dis-
played if a NICAM
signal is received
when "NICAM OFF"
is selected in the AV
SETUP MENU.
54
NICAM ST
NICAM M1
NICAM M1/2
NICAM OFF
German A2 stereo sound reception:
Stereo program indication
It will be displayed for approx. 4
seconds when stereo programs
are being received.
Bilingual program indica-
tion
It will be displayed for approx.
4 seconds when bilingual pro-
grams are being received.
NOTE:
The sound indications of STEREO/BILINGUAL/etc. are displayed
automatically for about 4 seconds on the TV screen in the VCR
mode. In the DVD mode they cannot be displayed, so please
press DISPLAY to check the sound indications.
Playback
Use AUDIO SELECT to select under stereo/mono or bilingual
playback. See the table below for more information.
On-screen indications
Stereo playback
(for 4 sec.)
performed in:
Stereo
HI-FI
STEREO
Left channel signal
output from both
HI-FI
loudspeakers
L CH
Right channel
signal output from
HI-FI
both loudspeakers
R CH
Mono
MONO
NOTE:
When playing HiFi cassette tapes recorded on another VCR, the
sound output may be distorted. This is normal and no indication
of a unit malfunction. Try to minimise sound distortions by using
TRK (TRACKING) +/– or change to MONO by pressing of
AUDIO SELECT.
STEREO
BILINGUAL
Bilingual playback
performed as follows:
Simultaneously
both languages
from HiFi track
(Mixed sounds)
One's mother
tongue dubbing
(Main sound)
Original sound
track (Sub sound)
One's mother
tongue dubbing
(Main sound)