Sharp DV-RW250X Operation Manual page 51

Recording a TV program
Auto Rewind feature
This VCR will automatically rewind the
tape when the tape has ended (except
during OTR and TIMER REC). It will also
eject the tape.
NOTES:
• If the disc space become full, the
recording is stopped and "RECORDING
INTERRUPTED" will appear on the
screen.
• In the event of a power failure during
DVD recording including OTR and
TIMER REC, the program can not be
recorded on the disc.
When the power resumes, after the
VCR/DVD is turned on, the set checks
the disc to repair the error which is
caused by a power failure. This
checking process may require a few
minutes to about 1 hour according to
disc condition. In this process
"SYSTEM ERROR PLEASE WAIT
DISC CHECKING" will appear on the
screen.
To stop recording
Press STOP to stop recording.
NOTE:
When recording onto a DVD, even if STOP is
pressed during recording, recording does not
stop instantly. Recording may continue for as
long as approx. 10 seconds in the VR mode
or 30 seconds maximum in the Video mode.
To stop recording temporarily
Press PAUSE/STILL to avoid recording
unwanted material.
"4" will appear on screen for about 4 sec-
onds.
Press again to resume recording.
NOTES:
• In the recording onto a video tape, the pause function will be
released after about 5 minutes to prevent damage the video tape.
The unit will change to the STOP mode.
• When recording onto a video tape, you can change a recording
channel in the recording pause mode. (You cannot change a
recording channel in the DVD recording pause mode.)
49