Sharp DV-RW250X Operation Manual page 55

Timer recording
NOTES:
• Recording starts a few seconds be-
fore the preset starting time.
• You cannot use the timer recording
for the both DVD and VCR at the
same time.
• You can playback the DVD during
the VCR timer recording, and you
can playback the VCR during the
DVD timer recording.
• If the clock symbol ( ) blinks when
the timer recording ended, the TV
program has not been completely
recorded because of an insufficient
capacity for DVD disc or video tape.
Press TIMER REC to cancel the
timer program.
• While timer recording is in progress,
the timer program cannot be set,
changed or cancelled. If you need,
press TIMER REC to cancel the
timer recording.
SETUP MENU
TYPE
DATE (DD/MM)
START
END
CH
REC TO
REC MODE
ENTER
11
Select "OK" and press ENTER. The timer program is determined
and the TIMER REC SET screen appears again.
12
When you enter the other program for the timer recording, re-
peat the steps 3 to 11.
13
Press SETUP. The TIMER REC SET screen disappears and
the display will return to the normal screen.
14
Press TIMER REC. The timer indicator "
display and the unit stands by for recording.
• If the program is DVD recording only, the unit will change to
VCR mode automatically. (The DVD mode cannot be selected.)
• If the program is VCR recording only, the unit will change to
DVD mode automatically. (The VCR mode cannot be selected.)
• If the programs are DVD and VCR recording, the unit will turn
off. If you want to use the unit, press TIMER REC again to
deactivate the timer.
• If the clock symbol ( ) blinks in the display in spite of the
pressing of TIMER REC, the cassette may not have been
loaded yet. (see page 42)
• If the cassette is ejected in spite of the pressing of TIMER
REC, the erase prevention tab of the cassette may have been
removed. (see page 42)
Checking or changing the timer recording
When you want to check the selected timer recording, follow the steps 1
and 2 of "Setting timer recording" and display the TIMER REC SET
screen. To change the timer recording, select the program to be changed
and press ENTER. The changing method is the same as that for the
recording a program for the first time.
Cancelling the timer recording
Display the TIMER REC SET screen.
Select the program you want to cancel and press CANCEL, then the
selected program will be erased from the timer recording list.
In case Timer programs-overlap
Do not overlap timer programs as portions of the conflicting programs
will be lost. The first recording time has priority over the next recording
time as shown in the diagram below.
In this case, the next recording time is delayed a maximum of about
1 minute.
8 : 00
Program 1
Program 2
Program 3
Recording
Control Settings
TIMER REC SET
REC
ONCE
TO
20/11(THU)
20:00
23:00
1
DVD
LP
XP
OK
SP
LP
SLP
SELECT
ENTER RETURN BACK SETUP
9 : 00 10 : 00
Deleted Parts
Non Recorded Portion Parts
Prog.1 Prog.2
REC
MODE
END
" will appear on the
11 : 00
Prog.3
53