Setting The Clock; Auto Clock Setting - Sharp DV-RW550U Operation Manual

Set the correct time before using
Timer Recording. If a Public
Broadcasting Service (PBS) station is
available in your area, follow the Auto
Clock Setting below. If not, follow the
Manual Clock Setting on pages 23.

Auto Clock Setting

Make sure:
• The antenna/CATV connections
are correct.
• If this unit is connected to a
Cable Box or Satellite Box, select
the local PBS station to set the
clock automatically.
1
Press SETUP.
Easy Setting Menu or Advanced
Setting Menu will appear.
If Advanced Setting Menu is dis-
played, proceed to STEP 3.
Easy Setting Menu
OSD Language
Clock
Channel
DVD-RW Recording Format
Timer Programming
Auto Finalize
Progressive
Disc
Advanced Setting Menu
2
Select "Advanced Setting
Menu" using Cursor K / L,
then press ENTER.
Advanced Setting Menu will appear.
Advanced Setting Menu
Playback
Recording
Display
Select Video
Clock
Channel
Disc
Easy Setting Menu
3
Select "Clock" using Cursor
K / L, then press ENTER.
Clock menu will appear.
Clock
Clock Setting
Auto Clock Setting
Daylight Saving Time
22
Getting started

Setting the clock

4
Select "Auto Clock Setting"
using Cursor K / L, then
press ENTER.
Option window will appear.
Auto Clock Setting
OFF
Auto
Manual
The default is "Auto".
5
• If you do not know the PBS
channel number in your area,
select "Auto" using Cursor
VCR DVD
K / L, then press ENTER.
English
The setting will be activated.
• If you know the PBS channel
VR mode
number in your area, select
"Manual" using Cursor
OFF
K / L, then press ENTER.
Auto Clock Setting - Manual
Set Channel No.
CH 1
Enter the PBS channel
number using the Number
buttons or Cursor K / L,
then press ENTER.
The setting will be activated.
• If you want to set the clock manu-
ally and cancel the auto clock set-
ting function, select "OFF" using
Cursor K / L, then press ENTER.
The auto clock setting function
will be canceled.
6
Press SETUP to exit.
VCR DVD
7
Auto
ON
Press POWER to turn off the unit.
This unit will search for the clock time
only when the power is off. Leave it off for
several minutes to give this unit time to
set the clock on the front display panel.
7
VCR DVD
2
3
4
5
VCR DVD
Note
• The clock may set itself auto-
matically after you connect the
antenna/CATV signal to this
unit and plug in the power
cord. In this case, the current
time will appear on the front
panel display.
• If the current time is not dis-
played or the displayed clock
time is not correct, set the
clock manually.
5
1
6
VCR/DVD RECORDER
COMBINATION