Clock Setting; Manual Clock Setting - Sharp DV-NC65S Instruction Manual

Clock Setting

Manual Clock Setting

The clock will normally be set using teletext information when your
Unit automatically tunes in the broadcast channels. If for any reason
teletext signals are not present, your Unit will not be able to set the
clock. This procedure will allow you to set the clock manually.
Preparation
• Press OPERATE. Then move the VCR/DVD CHANGE
Switch to VCR.
1
Press VCR MENU.
2
Press ' / " to select "SET UP". Press SET to confirm.
3
Press ' / " to select "CLOCK." Press SET to confirm.
4
Press ' / " to select either 12 or 24 hour clock.
5
Press \ \ \ \ \ / | | | | | to select "TIME". Enter the time using the number
buttons or ' / ". If the minutes or hours are less than 10, enter
leading 0. If using the 12 hour clock enter AM or PM by pressing
AM/PM on the Remote.
6
Press \ \ \ \ \ / | | | | | to select "DATE". Enter the date using the number
buttons or ' / ". For example, for 1st April enter 01 04.
7
Press \ \ \ \ \ / | | | | | to select "YEAR". Enter the last two digits of the
year using the number buttons or ' / ". For example, for 2002
enter 02. For the year 2003 enter 03.
8
Auto Clock Setting
Press \ \ \ \ \ / | | | | | to select
CLOCK on/off (
confirm.
DVNC65SE028_038.pm6
Downloaded from: http://www.usersmanualguide.com/
SET UP
CHANNEL PRESET
CHANNEL SORT
CLOCK
LANGUAGE
:SELECT
SET :ENTER MENU:EXIT
CLOCK
MODE TIME DATE YEAR
12H 12:00AM 1/04 02 *
MODE:24H/12H
:SELECT :CHANGE
SET :ENTER MENU:EXIT
. Press ' / " to change between AUTO
*
is "ON", – is "OFF"). Then press SET to
*
35
VCR Setup
TIMER
OPERATE
SHOWVIEW EJECT
ON/OFF
ON VCR/DVD VCR MENU
DISPLAY
SCREEN SELECTOR DVD SETUP
FUNCTION PROG/ OPEN/
ANGLE
CONTROL REPEAT CLOSE
TITLE
DVD MENU
CLEAR SET
RETURN ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
AM/PM INPUT SELECT VCR DVD
/
REV FWD
PLAY
REC
PAUSE/STILL
STOP
TAPE DPSS
SKIP SLOW
SPEED
AUDIO
CH
OUTPUT
VCR DVD
VCR/DVD COMBINATION
RRMCGA071WJSA
• If AUTO CLOCK is set to OFF (– is
OFF) then you will need to update the
clock for daylight saving.
7/10/02, 5:49 pm
GB-35