System Connections - Sharp DK-A1H Operation Manual

System connections (continued)
DK-A1H
DK-A1H(BK)
ENGLISH
Connecting iPod to TV
iPod photo and 5th Generation iPod with photo and video can be
viewed by connecting to TV/monitor.
If the TV/monitor has a video input, connect it to the VIDEO OUT
socket on the rear of the unit.
Note:
Please make sure to set the iPod unit, to either NTSC or PAL to
match your TV signal. Please visit Apple's homepage for further
information.
AC power connection
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket. If you plug in the
unit first, the unit will enter the demonstration mode.
To AC input
Note:
Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
E-7
TV
Video cable
(not supplied)
To video
input socket
Wall socket
(AC 220 - 240 V, 50Hz)
Demonstration mode
The first time the unit is plugged in, the
unit will enter the demonstration mode.
To cancel the demonstration mode:
When the unit is in the demonstration
mode, press the E SOUND/DEMO
button. The unit will enter the power
stand-by mode (low power consumption
mode).
To return to the demonstration mode:
When the unit is in the power stand-by mode,
press the E SOUND/DEMO button again.
Note:
When the power is on, the E SOUND/DEMO button can be used to
select the E SOUND mode.