Programmed Play - Sharp CD-MPX100E Operation Manual

I Programmed play
You can choose up to 32 selections for playback in the order you like.
1
Whilst in the stop mode, press
one of the 1 - 3 buttons on
the remote control to select
the desired disc.
2
Press the direct search but-
tons on the remote control to
select the desired track.
Selected track number
You can also select a track by pressing the
button.
3
Press the MEMORY/SET (MEMORY) button to save the
track number.
When the track is memorised, "MEMORY" will appear.
4
Repeat steps 1 - 3 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR/DIMMER button.
5
Press the / button to start playback.
To clear the programmed selections:
Whilst the "MEMORY" indicator is lit, set the
stop mode and then press the CLEAR/DIM-
Selected disc number
MER button.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed. When all the tracks are cleared,
"MEMORY" indicator will disappear.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indica-
tor will be displayed. Then follow steps 1 - 3 to add tracks. The new
tracks will be stored after the last track of the original programme.
or
Notes:
G Opening the disc tray automatically cancels the programmed
sequence.
G Even if you press the ON/STAND-BY button to enter the stand-
by mode or change the function from CD (MP3/WMA) to another,
the programmed selections will not be cleared.
G During programme operation, random play is not possible.
Playback order
13/12/9 MPX100EA_2.fm
CD-MPX100E
19