General Control; Display Brightness Control - Sharp CD-MPX100E Operation Manual

General control

CD-MPX100E
MINI COMPONENT SYSTEM CD-MPX100W
DISPLAY
I Volume control
Press the VOLUME (+ or -) button to increase or decrease the
volume.
0 1 2
Volume Auto Fade-in
If you turn off and on the main unit with the volume set to 27 or higher,
the volume starts at 16 and fades in to the last set level.
12
.....
29 30 MAXIMUM
I Bass control
When the power is first turned on, the unit will enter the extra bass
mode which emphasises the bass frequencies, and "X-BASS" will
appear. To cancel the extra bass mode, press the X-BASS/DEMO
(X-BASS) button.
I Equalizer
When the EQUALIZER (EQUALIZER MODE) button is pressed, the
current mode setting will be displayed. To change to a different
mode, press the EQUALIZER (EQUALIZER MODE) button repeat-
edly until the desired sound mode appears.
FLAT No equalization.
ROCK For rock music.
CLASSIC For classical music.
For pop music.
POPS
VOCAL Vocals are enhanced.
For jazz.
JAZZ
I Display brightness control
When the unit is in power on mode, you can change the display
brightness by holding down the CLEAR/DIMMER button on the re-
mote control for 2 seconds or more.
04/12/22 MPX100EA_1.fm
TINSEA091AWZZ