Ac Power Connection; Demonstration Mode; To Turn The Power On - Sharp CD-MPX100E Operation Manual

System connections (continued)
CD-MPX100E
I AC power connection
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket. If you plug in the
unit first, the unit will enter the demonstration mode.
Notes:
G The unit will start the tape initialisation when plugged in to the AC
socket. During this process, initialising sound will be heard and
the unit cannot be turned on. Wait until the process is finished.
G Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
10
I Demonstration mode
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode),
press the X-BASS/DEMO button. The demonstration mode will be
cancelled and the display will disappear.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/
DEMO button again.
Note:
When the power is on, the X-BASS/DEMO button can be used to
select the extra bass mode.
I To turn the power on
Press the ON/STAND-BY button to turn the power on.
Wall socket
(AC 230-240V,
After use:
50Hz)
Press the ON/STAND-BY button to enter the power stand-by
mode.
04/12/22 MPX100EA_1.fm
MINI COMPONENT SYSTEM CD-MPX100W
DISPLAY
TINSEA091AWZZ