Recording To A Cassette Tape - Sharp CD-MPX100E Operation Manual

■
Various tape functions
Function Main Unit Remote
Control
Playback
Stop
Fast
forward/
Rewind
(TAPE 2
only)
Caution:
● To remove the cassette, press the
compartment.
● Before changing from one tape operation to another, press the
button.
● If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not open.
In this case, wait until the power is restored.

Recording to a cassette tape

Before recording:
● When recording important selections, make a preliminary test to
Operation
ensure that the desired material is properly recorded.
● SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
Press in the stop mode.
● The volume and sound controls can be adjusted with no effect on
the recorded signal (Variable Sound Monitor).
● For recording, use only normal tapes. Do not use metal or
CrO tapes.
● Recording can be operated in the TAPE 2 compartment only. The
Press in the playback
TAPE 1 compartment is for playback only.
mode.
Erase-prevention tab of cassette tapes:
● When recording on a cassette tape,
make sure that the erase-prevention
Press in the playback or
tabs are not removed. Cassettes have
stop mode.
removable tabs that prevent accidental
recording or erasing.
● To protect the recorded sound, remove
the tab after recording. Cover the tab
hole with adhesive tape to record on the
tape without the tab.
button, and then open the
Tab for
side B
13/12/9 MPX100EA_3.fm
CD-MPX100E
Side A
Tab for
side A
23