Sleep Operation - Sharp CD-MPX100E Operation Manual

Mini component system
Hide thumbs Also See for CD-MPX100E:
Table of Contents

Advertisement

I Sleep operation
The radio, compact disc and cassette tape can all be turned off au-
tomatically.
1
Play back the desired sound source.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
or
button to select
"SLEEP", and press the MEMO-
RY/SET button.
4
Press the
or
button to select time.
(Maximum: 3 hours - Minimum: 1 minute)
G 3 hours - 5 minutes
5 - minute intervals
G 5 minutes - 1 minute
1 - minute intervals
5
Press the MEMORY/SET but-
ton.
"SLEEP" will appear.
6
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep
operation finishes.
To confirm the remaining sleep time:
1 Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the
"SLEEP X : XX".
"X : XX" is sleep remaining time.
G The remaining sleep time is displayed for about 10 seconds.
G You can change the remaining sleep time whilst it is displayed
by pressing the MEMORY/SET button (steps 4 - 5).
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
1 Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the
"SLEEP OFF", and press the MEMORY/SET button.
I To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
Sleep and timer recording:
For example, you can fall asleep listening to the CD and record radio
programmes whilst sleeping.
1 Set the sleep time (see left, steps 1 - 5).
2 Whilst the sleep timer is set, set the timer playback or recording
(steps 2 - 10, pages 26 - 27).
Sleep timer setting
1 minute - 3 hours
or
button to select
Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback or recording will not be possible.
or
Timer playback or
recording setting
Sleep operation will
Timer playback or recording
automatically stop.
start time
13/12/9
MPX100EA_3.fm
CD-MPX100E
button to select
End time
Desired time
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents