Sharp CD-MPX100E Operation Manual page 24

Recording to a cassette tape (continued)
CD-MPX100E
DISPLAY
24
MINI COMPONENT SYSTEM CD-MPX100W
I Recording from a CD or MP3/WMA disc
You can record 3 discs continuously.
1
Press the ON/STAND-BY button to turn the power on.
2
Load a cassette into the TAPE 2 cassette compartment with
the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3
Press the CD button and load the desired disc.
4
Press one of the 1 - 3 buttons on the remote control to
select the disc to be recorded first.
5
Press the REC PAUSE (TAPE-2
) button.
Recording will be paused.
6
Press the / button to start recording.
G Disc playback will start approximately 7 seconds after the
tape starts.
G Recording is started from the selected disc. When the play-
back of the last disc is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
To perform programmed recording:
1 Programme discs and tracks. (See page 19.)
2 Press the REC PAUSE (TAPE-2
3 Press the / button.
To stop recording:
Press the button.
The disc and tape will stop.
Note:
G Whilst recording, OPEN/CLOSE
button is deactivated. It is rec-
ommended to perform disc recording after closing the disc tray.
13/12/9 MPX100EA_3.fm
) button.