The "One-Button-Record" Feature - Sharp DV-HR400H Operation Manual

Timer Recording/The GUIDE Plus+
The "One-Button-Record"
Feature
This is the most convenient feature for Timer
Recording that the GUIDE Plus+ System
accommodates. The One-Button Record
feature is available anytime you can highlight
a programme tile. This can be in the Grid,
after a search for a certain category or in your
recommendations under My TV.
The operation method is the same for both
HDD and DVD.
• You can timer record up to 16 programmes
scheduled within a month, including VIDEO
Plus+ system and manual recording.
• You can consecutively record up to 12
hours to HDD.
Preparation for Timer Recording
• Check that the clock is displaying the
correct time.
• If the TIMER indicator on the front of the
Recorder is lit, press TIMER ON/OFF to
turn off the TIMER indicator and to set the
Timer Standby mode to off.
1
Press GUIDE to display the
GUIDE Plus+ screen.
2
Press ' / " / \ / | to select a
programme tile in the grid.
3
Press Red (A) to set a Timer
Recording for the programme.
Press TIMER ON/OFF to place
the Recorder in Timer Standby
mode.
• At the right time, the Recorder will
tune to the correct channel and
record the selected programme.
P 00 1-Sep 17:21
Record
Travel: The World Heritages: Introduces the natural and
cultural heritages of the world.
BBC2 [P 02]
Grid Search
Wed,1 17:00
The Agents
Talk Show With ... Travel: The World Heritages
BBC1 The Agents
Weather
BBC2
Talk Show With ... The Agents
ITV1 Heartbeat
Football Championship
Channel 4
Heartbeat The Wonderful Nature (2) Tropical Rain Forest
Five Kojak: Fatal Flaw
The TV Cooking Show The Garden
NOTE
• During the Timer Standby mode, you
cannot edit or add a timer programme. To
edit or add a timer programme, cancel
Timer Standby mode first.
• If you turn off the Timer Standby mode
during timer recording, the timer recording
is switched to a normal recording which will
not stop at the timer recording end time. To
stop the recording, press REC STOP.
• Recording set with the One-Button-Record
feature is set with the following default
parameters:
Date / Name of the Programme / Channel /
Start Time / Duration / Mode (Rec Mode) =
SP / Frequency = once / Extra time at the
end = none (+0) / Destination = HDD
• The programmes you have designated for
recording can be reviewed and edited in
the "Schedule" Area.
Operating the power source while TV
listings data is being downloaded
• Even when the power is off, during
download of TV listings data, the internal
state of the power source is on. When you
want to use the Recorder while TV listings
data is being downloaded, press OPER-
ATE to cause the STANDBY indicator of the
Recorder to be lit red. (It may take 1-2
minutes for the STANDBY indicator to be lit
red.) After the STANDBY indicator is lit red,
press OPERATE but once more. (The
download of TV listings data will be
suspended.)
Channels Home
17:20 ( 40Min) i
My TV Schedule
17:30
Neighbours
Neighbours
News
Travel: The World Heritages Weakest Link
five News
®
System
49