Preparation To Operate This Recorder - Sharp DV-HR400H Operation Manual

Preparation to Operate This Recorder

DVD-RW DVD-RW
HDD DVD-R
VR MODE VIDEO MODE
1
Turn on the TV's power.
2
Switch the TV's input to the
AV input you used to connect
the Recorder.
3
Press to turn the
Recorder on.
• TV broadcast will be displayed.
NOTE
• To operate HDD from Recorder, press the buttons on the
––HDD–– sign (left side). As for DVD, press the buttons
on the ––DVD–– sign (right side).
DVD VIDEO VIDEO CD AUDIO CD
=
The
Remote
Recorder
Control
CD-R CD-RW CD-R
MP3 WMA MP3 WMA JPEG
Some operations such as "OPERATE" (turn
on/stand by), "RECORD" and "PLAY"(both HDD
and DVD) can be done by buttons both on the
Remote Control and the Recorder.
+
=
=
+
Remote Control
The same thing applies to
REC STOP and
4
Operating HDD
Press
• The HDD mode indicator on the
Front Panel Display appears, and
HDD operation is enabled.
Operating DVD
Press
• The DVD mode indicator on the
Front Panel Display appears, and
DVD operation is enabled.
Recording and Playback
• Refer to pages 38 to 79 for details
about recording and playback.
NOTE
• When you turn on the Recorder's power, the HDD and
DVD mode indicators will blink on the Front Panel
Display. During the blinking stage, system processing is
in progress. Wait until the blinking stops and the HDD
mode indicator turns on.
CD-RW
JPEG
on HDD (left) side
on DVD (right) side
The Recorder
STOP buttons.
.
.
35