One-Touch Timer Recording (Otr) - Sharp DV-SR85S(B Operation Manual

Hide thumbs

Table Of Contents

Table of Contents

This is a simple way to set the

recording time in blocks of 30

minutes. Check that the disc you

are recording onto has enough

space remaining for the time you

set.

Turn on the unit and insert a

recordable disc.

Make sure that the TV input is set

on the unit.

Select the recording mode

using [REC MODE].

(See page 23.)

Select the desired channel to

record using [PROG. K / L] or

[the Number buttons].

Note

• The remaining recording time will be displayed on the front panel display during One-touch Timer

Recording. Press [DISPLAY] to see it on the TV screen.

• Unlike the timer recording, you can perform the following operations during one-touch timer

recording.

- Turn off the power.

- Use [REC/OTR] or [STOP C].

• You cannot use the pause function during one-touch timer recording.

• The unit will be turned off automatically under the following conditions.

- No space remains on the disc.

- If a power failure occurs.

• When One-touch Timer Recording is finished and the power is turned off, the unit will switch to the

timer-standby mode automatically if a timer recording has been programmed. Press [ OPERATE] to

cancel the timer-standby mode to use the unit continuously.

• If you want to monitor the programme that you are recording, make sure the device such as STB is

turned off when it is connected to AV2.

Recording