Time Shift Viewing/Chasing Playback - Sharp DV-HR400H Operation Manual

Time Shift Viewing/Chasing Playback

With this Recorder, you can enjoy Time Shift Viewing and Chasing Playback—distinctive features of an HDD.
1 Time Shift Viewing
While you are watching a programme, the phone rings.... At
times like this, you can pause the programme at the press of
a button and watch the rest later.
NOTE
• It may take a moment for the Time Shift viewing to begin.
• Some programmes may not allow you to time shift view
due to copyright of the programmes.
• Programmes recorded for Time Shift Viewing will be
erased automatically if Time Shift Viewing is cancelled.
Time Shift Viewing (Pause)
You can pause during sudden phone call or when you want
to take a note. In such cases press TIME SHIFT to pause.
Press | | | | | PLAY to watch the rest of the programme.
Programme starts.
Actual time
(Live broad-
cast)
What you
watch
The phone rings and you press TIME SHIFT.
You are talking on the phone. (Not watching TV.)
You finish the phone call and press | PLAY.
Recording and Playback are in progress simultaneously.
You finish watching the programme.
You are watching the recorded programme.
Press I STOP/LIVE to return to the current (live) broadcast.
(Time shift recording stops at this point. Recorded
programmes will be erased automatically.)
NOTE
• If the HDD becomes full while watching a video in Time
Shift, the recording for Time Shift will stop, but playback
will continue. When Time Shift viewing is stopped
(finished), the video image recorded for Time Shift viewing
is deleted.
• A message will be displayed 5 minutes before timer
recording starts. If you are time shift viewing, it will stop
and goes back to live broadcast 3 minutes later (2
minutes before timer recording starts).
36
Live Programme ends.
2 Chasing Playback
You return home earlier than expected while timer recording
is in progress.... At times like this, you can watch the
programme from the beginning without having to wait for the
recording to finish.
NOTE
• It may take a moment for the Chasing Playback to begin.
Chasing Playback (Pause➔Play)
Press G REV or
(SKIP) during recording or timer
recording to watch the recorded programme from the
beginning (If there are one or more chapter markers
between the current position of recording and the start of the
chasing playback, press
back to the start.). If you press REPLAY, the programme will
return to the position 10 seconds before and start Chasing
Playback. If you press STILL/PAUSE, playback will stop
temporarily. In either case, recording continues in real time.
Live programme/
Timer recording starts.
Actual time
(Live broad-
cast)
What you watch
You come home and press G REV or K (SKIP).
Recording and Playback are in progress Simultaneously.
You finish watching the programme.
You are watching the recorded programme.
Fast Reverse/Forward Playback
If you press G REV or J FWD during Time Shift
Viewing or Chasing Playback, Fast Reverse/Forward
Playback starts.
If you press G REV (or J FWD) again, the speed of
Fast Reverse/Forward Playback changes as shown below.
When you select Fast Forward Playback (Forward only)
you can enjoy audio together with video (Rapid playback).
(Approx. 1.5x) (Approx. 8x) (Approx. 32x)
( Fast Reverse is Approx. 2x)
NOTE
• If you perform Fast Forward Playback during Time Shift
Viewing or Chasing Playback, the Recorder will automati-
cally switch to the playback screen when Fast Forward
Playback almost reaches the live broadcast. The timing
that goes automatically back to playback mode will
slightly differ depending on the speed of Fast Forward
and Recording Mode.
• When the unit automatically goes back to normal Play-
back during , you can still view the programme in Fast
Forward Playback up to the point of the live broadcast by
performing or .
(SKIP) plural times to get
Live Programme ends.
(Timer programme was
scheduled to end here.)