Post Code; Post Code Security; Changing Pin Number - Sharp DV-HR400H Operation Manual

Post Code

Post Code Security

This feature should allow the Police to identify
you as the owner of the Recorder if it is
stolen. Each time the Recorder is turned on,
your postcode will be displayed for 5
seconds. Your postcode cannot be changed
or removed without first entering the correct
PIN-number. If you would like to use this
function, follow the procedure below.
1
Press START MENU to display
the "START MENU" screen.
2
Press ' / " / \ / | to select
"OTHER SETTINGS", then press
SET/ENTER.
3
Press \ / | to select "CONTROL
SET ".
4
Press ' / " to select "POST
CODE", then press SET/ENTER.
5
Press the Number buttons to
enter your desired PIN number.
• This must be a 4 digit number in the
range 0000 – 9999.
OTHER SETTINGS ( CONTROL SET: POST CODE )
PIN NUMBER
- - - -
INPUT RETURN
0 9
6
After entering the PIN number,
press | to highlight the first digit
of "POST CODE".
7
To enter your post code press ' /
" to scroll through the charac-
ters, then press \ / | to move to
the next position.
8
Write your PIN number in the box
provided for future reference.
Important!
• Keep your Operation Manual separate
from your Recorder.

Changing PIN NUMBER

You can change your PIN number at any time
with the following procedure.
1
Press START MENU to display
the "START MENU" screen.
2
Press ' / " / \ / | to select
"OTHER SETTINGS", then press
SET/ENTER.
3
Press \ / | to select "CONTROL
SET".
4
Press ' / " to select "POST
CODE", then press SET/ENTER.
5
Press the Number buttons to
enter your current PIN number,
then press SET/ENTER.
6
Press \ to re-select PIN number.
7
Enter your new PIN number. Press
SET/ENTER to confirm, then
press START MENU or EXIT to
return to a normal screen.
2 [ SAT ]
4 2 1 / : 8 5 4
NOTE
• Your Postcode can be changed at any
time, but you must first enter your correct
PIN number. If the wrong PIN number is
entered, an "ERROR" will appear. Re-enter
the correct number.
EXIT
EXIT
31