Using Other Types Of Video Output - Sharp DV-HR400H Operation Manual

Basic Connection

Using Other Types of Video Output

In order to view clearer DVD images, it is recommended that you use a commer-
cially available S-video or component video cable when connecting your TV to the
video output.
To video/audio
input jacks
Video/Audio cable
To VIDEO/AUDIO
output jacks
The Recorder
TV
To component
input jacks
Component video cable
(commercially available)
To COMPONENT
OUT jacks
24
TV
or
S-video cable
(supplied) (commercially available)
To audio
input jacks
To AUDIO
output jacks
The Recorder
To S-video
input jack
To S-VIDEO
output jack
Video/Audio cable
(supplied)
Connecting Using
an S-video or Video/
Audio Cable
Connect the S-VIDEO or VIDEO
Output jack on this Recorder to
the S-video or video input jack
on your TV using an S-video
cable (commercially available)
or Video/Audio cable (supplied).
NOTE
• When connecting both S-video
cable and Video/Audio cable to the
Recorder, the image of S-video
cable is displayed.
• Progressive output works only when
the Recorder is connected with TV by
Component video cable.
Connecting Using
the component
Video Cable
Connect the COMPONENT OUT
jacks on this Recorder to the
component input jacks on your
TV using a component video
cable (commercially available).
Important!
When using this connection:
• If the option under "START MENU"
- "OTHER SETTINGS" - "ADJUST-
MENT" - "VIDEO/AUDIO SETTING"
- "CONNECTING TERMINAL" -
"LINE 1 OUT" is changed to
"RGB", no picture is displayed on
the TV. In this case, hold down the
RGB OFF button on the remote
control (under the cover) for more
than 2 seconds.
• If you set the option "LINE 1 OUT"
(see above) as "RGB", the
progressive output does not work.
• If your TV is compatible with
progressive-scan component
video, set "PROGRESSIVE OUT
SET" to "YES". (Page 108)