Table of Contents
Advertisement
Follow the steps below to record
a TV programme.
VCR
DVD
Press
first.
1
2
3
4
5
6
7
8
9
0
+10
PLAY
STOP
VCR/DVD COMBINATION
NA527AD
1
Press [ OPERATE] to turn on
the unit.
Turn on the TV and be sure to
select the input to which the unit
is connected.
2
Press [OPEN/CLOSE EJECT A] to
open the disc tray.
3
Place the disc on the disc tray
with its label facing up. Be sure
to align the disc with the disc
tray guide.
To set the One-touch Timer Recording (OTR)
This is a simple way to set the recording time in blocks of 30 minutes.
At step 7, press [DVD REC/OTR I] repeatedly until the desired record-
ing time (30 minutes to 8 hours) appears on the TV screen.
One-touch Timer Recording will start.
• To change the recording length during one-touch timer recording,
press [DVD REC/OTR I] repeatedly until the desired length appears.
• To cancel One-touch Timer Recording within the specified time, press
[STOP C].
• The remaining recording time will be displayed on the front panel display
during One-touch Timer Recording. Press [DISPLAY] to see it on the TV screen.
• Unlike the timer recording, you can perform the following operations during One-touch Timer Recording.
- Turning off the power.
• You cannot use the pause function during One-touch Timer Recording.
• If DVD One-touch Timer Recording is completed during VCR playback or recording, the DVD will be in
stop mode and the VCR keeps the current mode.
• When One-touch Timer Recording is finished and the power is turned off, the unit will switch to the timer-
standby mode automatically if a timer recording has been programmed. Press [T-SET] to cancel the timer-
standby mode to use the unit continuously.
Note
• You can change the channel while in the REC pause mode when basic recording.
• You cannot change the recording mode while in the REC or REC pause mode.
• If the clock is not set, the date and time space next to title names in the Original or Playlist will be blank.
• The unit will be turned off automatically under the following conditions.
- No space remains on the disc. - If a power failure occurs.
• If you want to monitor the programme that you are recording, make sure the device such as Set-top Box
is turned off when it is connected to AV2.
• Even if the broadcasting you are recording is in the SECAM system, this unit automatically converts it to
the PAL system when recording.
30
EN
Downloaded from:
http://www.usersmanualguide.com/
Basic recording / One-touch Timer Recording (OTR)
4
Press [OPEN/CLOSE EJECT A] to
close the disc tray.
5
Select the recording mode
using [REC MODE].
(See page 24.)
6
Select the desired channel to
record using [PROG.
[the Number buttons].
7
Press [DVD REC/OTR I] to start
recording.
The "I" mark will be displayed
for 5 seconds.
Disc
tray
guide
- Using [DVD REC/OTR I] or [STOP C].
Recording
SP
0:58
] or
/
P08
I
To pause the recording, press
[PAUSE F]. Press [PAUSE F]
or [DVD REC/OTR I] again to
restart the recording.
8
Press [STOP C] to stop the
recording.
This operation may take a
few moments to complete.
OPERATE
OPEN/CLOSE
1
SETUP
DUBBING
EJECT
TIMER PROG.
T-SET
SHOW VIEW
REC MODE
RAPID PLAY
VCR
DVD
CM SKIP
ZOOM
TOP MENU
MENU LIST
5
ENTER
RETURN
.@/:
ABC
DEF
1
2
3
PROG.
6
GHI
JKL
MNO
6
4
5
PQRS
TUV
WXYZ
7
8
9
SKIP
CLEAR/C-RESET
SPACE
DISPLAY
0
REV
FWD
PLAY
VCR
DVD
REC/OTR
REC/OTR
STOP
8
REPEAT
AUDIO
SEARCH
SLOW
PAUSE
I
0:30
0:30
(Normal Recording)
8:00
7:30
2
4
7
1:00
Advertisement
Table of Contents
