Preparation To Operate This Recorder - Sharp DV-HR300X Operation Manual

Preparation to Operate This Recorder

DVD-RW DVD-RW
HDD
VR MODE VIDEO MODE
1
Turn on the power of TV.
2
Switch TV input to the AV
input used to connect to the
Recorder.
3
Press
Recorder on.
• TV broadcast will be displayed.
30
DVD-R DVD VIDEO VIDEO CD
Buttons on Remote Control
Buttons on Recorder
to turn the
AUDIO CD CD-R CD-RW
MP3 MP3
Buttons used for this operation.
Buttons with the same name on the Recorder and
remote control will perform the same operation.
4
Operating HDD
Press
• The HDD button on the front of the
Recorder lights up, and HDD
operation is enabled.
Operating DVD
Press
• The DVD button on the front of the
Recorder lights up, and DVD
operation is enabled.
Recording and Playback
• Refer to pages 33 to 63 for details
about recording and playback.
NOTE
• After turning on power, both the HDD and DVD buttons
on the front of the Recorder will blink for a moment while
the Recorder is getting ready. Perform this operation
after the HDD button lights up.
.
.