Preparation To Operate This Recorder - Sharp DV-HR400S Operation Manual

Preparation to Operate This Recorder

DVD-RW DVD-RW
HDD DVD-R
VR MODE VIDEO MODE
1
Turn on the power of TV.
2
Switch TV input to the AV
input used to connect to the
Recorder.
3
Press to turn the
Recorder on.
• TV broadcast will be displayed.
NOTE
• To operate HDD from Recorder, press the buttons on the
––HDD–– sign (left side). As for DVD, press the buttons
on the ––DVD–– sign (right side).
DVD VIDEO VIDEO CD AUDIO CD
=
The
Remote
Recorder
Control
CD-R CD-RW CD-R
MP3 WMA MP3 WMA JPEG
Some operations such as "OPERATE" (turn
on/stand by), "RECORD" and "PLAY"(both HDD
and DVD) can be done by buttons both on the
Remote Control and the Recorder.
+
=
=
+
Remote Control
The same thing applies to
REC STOP and
4
Operating HDD
Press
• The HDD mode indicator in the front
panel display appears, and HDD
operation is enabled.
Operating DVD
Press
• The DVD mode indicator in the
front panel display appears, and
DVD operation is enabled.
Recording and Playback
• Refer to pages 38 to 79 for details
about recording and playback.
NOTE
• When you turn on power, the HDD mode indicator and
DVD mode indicator in the Front Panel Display will blink.
As the system processing is in progress during blinking,
wait until the blinking stops and the HDD mode indicator
turns on.
CD-RW
JPEG
on HDD (left) side
on DVD (right) side
The Recorder
STOP buttons.
.
.
35
GB