Sharp Multi Access Operation Manual page 6

Hide thumbs Also See for Multi Access:

Table of Contents

A misfeed has occurred.

A temporary interruption of operation has occurred due to an error during a copy job (for details,

refer to "Operation when an error has occurred").

Jobs and Multi-Access

Changing jobs

In the case of a walkup job, you can temporarily interrupt a job that is currently being executed and

perform the walkup job. However, this is not possible when the current job is a two-sided copy or

two-sided print job.

Displaying the job status menu

You can check the status of a job from the job status menu. For information on the job status

menu, refer to the operation manuals for each mode.

Press the JOB STATUS key.

The job status menu appears in the display.

The display varies depending on the current mode when the JOB STATUS key is pressed.

Items in the job status menu

Function setting status

This shows selection of two-sided copying, sort copy, and special functions for copy jobs,

and special functions for fax transmission jobs. For information on the function setting sta-

tus, refer to the operation manuals for copy mode and fax mode.

Print job status

This shows the status of auto print jobs, the paper size, tray information.

Fax status (transmission job status, stored transmission job status, confidential

reception status)

These items appear when the JOB STATUS key is pressed in fax mode. Information on

fax status messages can be found in the operation manual for fax mode.

Manual receiving

When this is selected, faxes can be received manually from modes other than fax mode.

(

page 8)

Notes

If the machine does not have the fax feature, "MANUAL RECEIVING" will not appear.

If the machine does not have the fax feature, the print job status menu appears when the

JOB STATUS key is pressed from print or scan mode.

Conditions in which the job status menu cannot be displayed

The job status menu cannot be displayed when the machine is in the following states.

An error has occurred that requires a service call.

A key operator program is being used.

Multi-Access

Table of Contents