Table of Contents
Advertisement
Multi-Access
Jobs processed simultaneously
Scanner transmission jobs, memory transmission jobs (memory transmission jobs cannot
be processed simultaneously with direct transmission jobs).
1st priority group
Walkup jobs
Notes
G
For example, if a fax is received during a copy job, the fax is not printed until the copy job
has been completed. (If the fax is urgent, it is possible to interrupt copying and print the fax.)
G
For example, if a scan or fax job is stored during a copy job and the machine runs out of
paper, the stored scan or fax job is begun. However, this does not apply to copy jobs
stored in two-sided printing and print priority mode. For details, refer to "Operation when
errors occur".
Functions and Multi-Access
Functions and the operation panel
This machine has four modes: copy mode, print mode, scan mode, and fax mode. The mode can
be changed by pressing the appropriate mode key. Note that the number of modes supported var-
ies depending on the model.
The operation panel is divided into the two following areas. This illustration shows the operation
panel of models with the most installed features.
Fax area
G
The main area is used for copy, print, and scan modes.
G
The main area and the fax area is used for fax mode.
Note
G
The indications of the operation panel may differ depending on the country and the region.
2
Copy jobs (including electronic sort functions)
Fax scan jobs
Direct transmission jobs
Scan jobs
2nd priority group
Auto print jobs
Print jobs (including ROPM jobs)
Fax reception jobs
Transaction reports / activity reports
(including auto printing)
Simultaneous processing
Auto transmission jobs
Memory transmission jobs
Scanner transmission jobs
Main area
Advertisement
Table of Contents
