Installing; Install Procedure For Windows 98/Me/2000/Xp - Sharp AN-WC11B Operation Manual

8. Installing

8.1 Install Procedure for Windows 98/Me/2000/XP

Install this software using the setup program included on the CD-ROM.
CAUTION
• Make sure to consult your Network Administrator when installing this software on a computer con-
nected to a network.
• Before touching the Wireless LAN PC Card, make sure to touch any metallic object such as a
faucet or doorknob to discharge any static electricity in your body.
Before installing
• If there are any other 11 Mbps (IEEE802.11b std) wireless LAN card drivers already installed
on your computer, make sure to uninstall them before performing the procedure below.
• Do not insert the wireless LAN PC card into the PC card slot on the computer until indicated
by the instructions on the screen.
1
Make sure that the computer you are using supports this software.
For details, see
2
Turn on the computer.
• If your operating system is Windows 2000 or Windows XP, log on using an account that has
Administrators permission.
3
Make sure to close all other applications before installing.
4
Make sure that there is no Wireless LAN PC Card inserted yet.
5
Insert the included CD-ROM into the computer's CD-ROM drive.
6
Select "English", and click "OK" when the "Choose Setup Language" dialog box
is displayed.
If the "Choose Setup Language" dialog box is not displayed:
1 Click the "Start" button, and then "Run".
2 Enter "R:\setup.exe" and click "OK".
(Enter the CD-ROM drive letter if it is different from "R".)
"4. System Requirements" on page 6.
-9