Table of Contents
Advertisement
When the LINK indicator on the Wireless LAN PC Card is lit:
1 Double click the wireless network connection icon (
2 Select "SHARP_PRJ" and click "Connect".
Make sure that the icon is green (
12
From the "Start" button, click "Control Panel".
13
On the upper left hand cover, click "Switch to Classic View", and then click "Sys-
tem" on the right.
14
Click the "Hardware" tab, and then click "Device Manager".
15
Double click "Network adapters".
If the "Sharp AN-WC11B Wireless LAN PC Card" is displayed, installation is completed.
If there is a yellow " ? " or " ! " mark next to the "Sharp 11 Mbps Wireless LAN PC Card" icon,
then installation has failed. Refer to
If the unit does not function properly:
"!", "?" or "×" is displayed on the "Sharp AN-WC11B Wireless LAN PC Card" icon indicates that the
Wireless LAN PC Card driver is not functioning.
The following can be probable causes for the error:
• The "Sharp AN-WC11B Wireless LAN PC Card" is not properly installed.
• Another wireless LAN PC card is already installed.
• Driver or hardware conflict.
If any of these errors occur, uninstall the "Sharp AN-WC11B Wireless LAN PC Card" and then
reinstall it again. (Refer to
If there is another wireless LAN PC card already installed, uninstall it first before installing the
Sharp AN-WC11B Wireless LAN PC Card.
To uninstall other wireless LAN PC cards from your computer, refer to the documentation of
the respective wireless LAN PC card.
-14
An error occurred
page
) in the status bar.
). The LINK indicator lights up.
"11.
Troubleshooting" on
15.)
page
28.
Advertisement
Table of Contents
