Table of Contents
Advertisement
• Using the "PING" command, you can check if the "TCP/IP" is operating correctly. You can also
check if the IP address is set.
1
Open Command Prompt (MS-DOS Prompt).
Windows 98/98SE: Start → Programs → MS-DOS Prompt
Windows Me: Start → Programs → Accessories → MS-DOS Prompt
Windows 2000: Start → Programs → Accessories → Command Prompt
Windows XP: Start → All Programs → Accessories → Command Prompt
2
After the Command Prompt window has opened, enter the "PING" command.
Example:
C:\> ping XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX is the Host IP Address.
3
The following will be displayed if a successful connection is made.
The screen image may appear slightly different depending on the operating system.
Example: When the Host IP Address 192.168.150.150
4
If a connection cannot be made, "Request timed out" is displayed.
Recheck the wireless LAN settings and the network settings.
If all else fails, consult your Network Administrator.
5
To return to the Windows desktop, type "exit", and then press the "Enter" key.
-31
Advertisement
Table of Contents
