Sharp AN-WC11B Operation Manual page 4

Precautions for use
Should smoke, strange odors, or
other abnormalities occur, turn
off the computer that has the
Wireless LAN PC Card installed
and the wireless access point,
and remove the Wireless LAN
PC Card. After making sure that
smoke has stopped, contact your
nearest Sharp Authorized
Projector Dealer or Service
Center. Continued use creates
the danger of fire, electric shock
or malfunction.
Make sure that water or other
liquids do not wet the Wireless
LAN PC Card. Also, do not touch
the Wireless LAN PC Card with
wet hands. Doing so creates the
danger of fire, electric shock or
malfunction.
Do not attempt to disassemble,
modify or repair the card by
yourself. Doing so may cause
malfunction.
Before installing or removing the
Wireless LAN PC Card, make
sure to touch any metallic object
such as a faucet or doorknob, to
discharge any static electricity in
your body.
The Wireless LAN PC Card may
become hot after long hours of
usage. Take care when removing
the card so as to avoid burns.
Make sure that chemical agents
or harmful gases do not come in
contact with the card. This may
corrode the card or cause harm
to humans.
-4
WARNING
Locations for use
Do not use in wet places or
places with high humidity, and
places where dew can easily
form. Doing so may lead to short
circuit or malfunction.
Do not use in places exposed to
direct sunlight, near fire or heat
sources. The temperature might
rise and lead to fire and
damage.
Do not use in places exposed to
large amounts of dust, as it may
cause malfunction.
Do not use in places where the
card can be exposed to impact
or vibration. Doing so may lead
to malfunction and damage.
Do not use in places exposed to
strong magnetic fields, static
electricity and places where
signal interruption may occur
(near a microwave oven etc.).
Doing so may lead to
malfunction or damage.