Table of Contents
Advertisement
3
Click "Apply".
The character string entered and the generated keys are both displayed with [
When the character string is entered and the 4 keys have been generated, it will be easier to set the
same keys for all the members using the wireless LAN.
Using the Encryption (WEP) Key
In the "Use WEP Key" box, you can set which one of the 4 encryption keys is to be used when
transmitting data over the wireless LAN.
1
Click the pull down button on the right of the "Use WEP Key" box.
The WEP keys that can be used are displayed in a list.
2
Select the key number you want to use and click "Apply".
The selected WEP key is set.
Any key can be used as a WEP key, if the same key is in the same location on the transmitter's
access point or Wireless LAN PC Card.
10.4 "About" Tab
The Version Tab provides information on the version of the Network Driver, the Configuration
Utility, and the firmware in the Wireless LAN PC Card. In addition, this menu also provides the
MAC address of the Wireless LAN PC Card.
×
].
-27
Advertisement
Table of Contents
