Sharp AN-WC11B Operation Manual page 19

9
Enter the configuration name in "Profile Name".
Enter "802.11 AdHoc mode" here as an example.
10
Select "Peer-to-Peer" in "Network Type".
• When connecting to the Network using an Access Point, change the "Network Type" to "Ac-
cess Point".
• When changing a channel, use '" to select the channel.
• When changing the SS ID, enter SS ID in the "SS ID" field.
• When setting the encryption key, refer to
11
Click "Apply".
12
Click on the upper right of the screen to close the "Configuration Utility" dialog
box.
To communicate again with the access point:
When setting in the following way, you will be able to communicate again with the access point.
• Check the Windows Network Settings. (For more information about the settings, please
refer to the Windows user's guide.)
• In the "Configuration" tab (step 10 above), select "Access Point" in "Network Type".
"10.3 Encryption Tab" on page 25.
-19